|
3021PRO, 3021BPRO / 055PRO
Tripod Parts
T
The
3021BN and 3021BPRO are black |
The 3021N and 3021PRO
are the same tripod as far as the
legs are made, the main casting
where the center column connects to
the legs is different. The
3021PRO the sidearm can be taken out
of the vertical position and
reinserted horizontally. |
A
Upper leg locks for the 3021N,
3021Pro & 3021BPRO
B Lower leg locks for
the 3021N, 3021Pro & 3021BPRO
C
Replacement Snap lock lever
Shown below. Replacement for
the upper or lower leg lock.
D
Grub screws are the three
screws that keep the head tightly
locked on the tripod column.
Sold individually.
E
Column Lock Knob Allows
you to lock the height of the center
column
E2 Insert Nut
and Spring Presses against center column with lock knob
F
Leg Brace Attaches leg
to main casting of tripod
G Rubber feet fit at
the bottom of each leg and keep the
aluminum tube from scratching your
floors.
G1 Spike feet fit at the bottom of each
leg and use a metal spike to give you better traction on ice or hard
surfaces.
H
Wrench and Clamp
I
Center Column Cap
|
 |
A
R055,388 Upper Leg Lock $25.99;
Positive locking action. Use
these snap lock levers to lock the
legs height. Sold individually
|
 |
B
R055,389 Lower Leg Lock $29.99;
Positive locking action. Use
these snap lock levers to lock the
legs height. Sold individually
|
 |
C
R055,324 Snap Lock Lever $10.99.
|
 |
C
R190,321 3 pack Rubber Feet $8.99
|
 |
D
R3,0020 Grub Screw $1.99; Tighten
the grub screw to lock the head to
the tripod.
|
 |
E
R190,311 Column lock knob $6.99
|
 |
F
R055,303 Leg Brace $19.99; Attaches
the leg to the main casting of the
tripod.
|
|
|
G
3 pack Rubber Feet $8.99
|
 |
G1 200SPK3 Spiked
Feet Set $34.99
|
 |
H
R190,427 Wrench and clip $7.99
|
 |
I
R055,357 Center Column Cap $19.99
|
 |
J
R055,309 Insert Nut & Spring $3.99
|
