|
3021PRO, 3021PROB / 055PRO, 055PROB
Tripod Parts
Version 4 made after circa Sept 2004
For
3021PRO, 055PRO serial numbers from A0002304.
The 3021BPRO and 055PROB are black, serial numbers from A0000067.
All the parts supplied will be for
the silver tripods |
|
A
Upper leg locks
A1
Snap Lock Lever Shown below.
B Lower leg locks
B1
Snap Lock Lever Shown below.
C Rubber feet fit at
the bottom of each leg and keep the
aluminum tube from scratching your
floors.
C1 Spike feet An add on accessory that
may be useful on sand and snow.
D
Grub screws are the three
screws that keep the head tightly
locked on the tripod column.
Sold individually.
E
Center Column Top
F
Column Lock Knob Allows
you to lock the height of the center
column
F1
Locking Shoe Presses against center
column to lock in place
G
Leg Brace Allows you
to lock the height of the center
column
H
Wrench and Clip (Not shown
on diagram at left, shown below)
|
 |
A
R055,388 Upper Leg Lock $29.99;
Positive locking action. Use
these snap lock levers to lock the
legs height. Sold
individually, choose upper or lower
leg lock.
|
 |
A1
R055,390 Upper Snap Lock Lever
$10.99; Not interchangeable with the
lower leg locks.
These have been discontinued, we are working on a replacement. If
you order this time the replacement WILL NOT look like the picture, it will
be cosmetically different, but functionally the same.
|
 |
B
R055,389 Lower Leg Lock $29.99;
Positive locking action. Use
these snap lock levers to lock the
legs height. Sold
individually, choose upper or lower
leg lock.
|
 |
B1
R190,392 Lower Snap Lock Lever
$10.99; Not interchangeable with the
upper leg locks.
|
 |
C
R055,520 set of 3 Foot $13.99
|
 |
C1 200SPK3 Spiked Foot Set $34.99 These
are accessories and not original parts that came on the tripod.
|
 |
D
R3,0020 Grub Screw $1.99; Tighten
the grub screw to lock the head to
the tripod.
|
 |
F R004,80 Lock Knob $8.99
|
 |
E
R055,380 Center Column Disk $21.99
|
| |
F1
R055,309 Insert Nut & Spring $9.99
|
 |
G
R055,303 Leg Brace $19.99; Attaches
the leg to the main casting of the
tripod.
|
 |
H
R190,427 Wrench and clip $7.99
|