|
Bogen 3021 version 5 or 3221(black)
/ Manfrotto 055 or 055B (black)
parts list from for tripods made after 1999
This style was any 3021/3021S/ 055/ 055SH made in silver color
This style was any 3221/3221S/ 055B made in black
All parts
supplied are for the silver tripods.
This is what we have identified as Version 5.
The parts listed here that are identified as Used as reconditioned used
parts from the same model as the identifiers show. |
|
|
A
Grub screws
B USED Short Center Column
B1 USED Short Center Column with Extension
B2 USED Long Center Column
B3
Center column Lock Knob
C
USED Main Casting Assembly
C2
USED
Top Plate
C3
USED
D
USED Upper Leg Tube With Leg Brace
E USED Upper leg lock for 3020
Old style.
F
Upper leg lock clamp new style snap lock for 3021
Old style.
F1 Replacement Flip lever for the old style
"flip Lock" only. Will not fit the newer
3021N/PRO style leg locks.
G
USED Middle Leg Tube
H
USED Lower leg lock for the 3020 Old style tripod.
I
Lower leg lock clamp new style snap lock for the 3021 Old style tripod.
I1 Replacement Flip lever for the old style
"flip Lock" only. Will not fit the newer
3021N/PRO style leg locks.
J Nut
caps
K
USED Lower Leg Tube with foot
L
Rubber feet
|
A
Grub screws (shown left) are
the three screws that keep the head
tightly locked on the tripod column.
Sold individually. |
|
|
B USED Short Center Column |
|
|
B1 USED Short Center Column with Extension |
This part is not available on a regular enough basis for us to offer it. |
|
B2 USED Long Center Column |
|
B3
Center column Lock Knob
NO LONGER AVAILABLE |
|
C
USED
Main Casting Assembly
|
|
C2
USED
Top Plate
|
|
| C3
USED |
|
| D
USED Upper Leg Tube With Leg Brace |
G
Leg Braces (shown
left).
This is the part that holds the leg to the main casting and allows the leg
to move in and out to the side.
Brace A is what we
call version 1 There is no visible screws. This is the oldest one
Brace B is what we call version 3 There is only one screw visible on the
back of the leg, this is the newer of the three braces.
Brace C is what we call version 2 There are two screws that are visible
front or back of leg. this is on of the most common ones available.
For any of the versions this part is No longer
Available by itself, is is only available USED with the top leg tube attached
as part H1 shown below.
|
E
USED Upper leg lock clamp for 3021
Old style. This part has
been formally discontinued by Bogen. We occasionally get a few used parts
from time to to time. These are not always available. Condition is
good, some scratches and wear marks but completely usable and complete
working parts. |
|
|
F
USED Upper leg lock clamp for 3021 NEW style.
|
|
F1
Replacement Flip lever for the old style double spiral "flip Lock" as shown at right.
Fits the OLD STYLE double spiral "flip Lock" only. Will not fit the
newer 3021N/PRO style snap lock leg locks, or some of the oldest
single spiral leg locks. There is no way to tell
which leg lock uses this lever unless you have the old part and it is a
double spiral as shown in the picture.
As you can see below the lever mechanism is
different and not compatible with the old single spiral style.
So if in doubt it is better to buy a whole
clamp assembly.  |
Replacement Flip lever
$12.99
|
| G
USED Middle Leg Tube (shown
left). This is USED and is not always available. Condition
is good, some scratches and wear marks but completely usable and complete
working parts. |
|
|
H
USED
Lower leg lock clamp for the 3021 Old style tripod.
This part has been formally discontinued by
Bogen. We occasionally get a few used parts from time to to time.
These are not always available. Condition is good, some scratches and wear
marks but completely usable and complete working parts. |
|
|
I
USED
Lower leg lock clamp for the 3021 NEW style |
|
|
I1
Replacement Flip lever for the old style double spiral "flip Lock" as shown at right.
Fits the OLD STYLE double spiral "flip Lock" only. Will not fit the
newer 3021N/PRO style snap lock leg locks, or some of the oldest
single spiral leg locks. There is no way to tell
which leg lock uses this lever so if in doubt it is better to buy a whole
clamp assembly. |
Replacement Flip lever |
J Nut
caps (shown left) help to lock
the tension nuts on the leg locks,
so as to keep the tension even
during years of use and to keep the
nuts from working loose and getting
lost. Packs of 5. Will not fit the newer
3021N/PRO style leg locks. |
|
| K
USED Lower Leg Tube with foot |
|
 L
Rubber feet 3 pack press fit at the
bottom
of each leg and keep the aluminum
tube from scratching your floors. |
|
 L
Spiked Feet Set of 3 with screwdriver |
L
200SPK3 Spiked Feet Set $34.99
|
| |
|
| |
|
| |
|
| |
|
| |
|
