3051

Bogen Tripod Parts.com & ManfrottoTripodParts.com

Click Here to View Your Shopping Cart

Click for
www.SpartanPhotoCenter.com

Click for
www.TripodQuickRelease.com

Bogen 3051 & 3251 black Tripod Parts The 3050 & 3250 are the same tripod thought they came with a factory installed 3047 head
Sorry no picture is available at this time. Use the parts photos below to EXACTLY match the shape of the parts needed.	These are for the newest version of the tripod which is the black aluminum crank and 6 sided center column. Any tripods that have a silver crank or round center column, or are older than 5 years will not take these parts. Parts for the Round center column tripod are no longer available and except for the leg locks are not interchangeable with these newer parts. C Replacement Foot D Tightening Collar E Center Column is 6 sided, triangular with rounded corners F 360 bubble level G Center Column Lock Knob H Elevation Crank H1 Column Crank Gear J Grub Screw K Strut Lock Knob L Center Column Plug M Rod N Top Plate

	B3 3036 Lower Leg Locking Flip lever This is the flip lever handle only, that fits onto the old lever style leg locks only.
	C Replacement foot
	D Tightening Collar
Click on picture for larger view	Center Column is 5 sided, sort of triangular with rounded corners and teeth cut into one side for the Column Crank Gear to fit into in the housing. Round center column tripods no longer have parts available. E 13 inch long original part
	F 360 bubble level pushes into place and is held tight by friction. We do not recommend that you use glue. The bubble level will be shipped in a square protective cover that is easily removed by pushing the level out from the bottom. Bubble level shown at the right.
	G Center Column Lock Knob locks the column in place during use.
	H Elevation Crank for the 6 sided center columns. It will not work with the round center columns.
	H1 Column Crank Gear
	J Grub Screw are the three screws that tighten into the head to prevent the head from loosening during use.
	K Strut Lock Knob is one of the three knobs that allow you to tighten each leg stabilizer strut independently.
	L Center Column Plug fits into the bottom of the center column preventing it from cranking completely out of the tube.
	M Rod Approximately 9.75 inches long, threaded at both ends, with a brass nut on one end.
	N Top Plate

Spartan Photo Center,inc
PO Box 160642
Boiling Springs,SC 29316
Local calls 864-583-6835
For orders 864-699-9333
See our other websites
w www.SpartanPhotoCenter.com w www.TripodQuickRelease.com